4-7
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-3
• Unlocking and Locking Options, page 4-4
• Editing Values, page 4-5
• Network Configuration Menu, page 4-7
• Device Configuration Menu, page 4-15
Network Configuration Menu
The Network Configuration menu provides options for viewing and making a
variety of network settings. Table 4-2 describes these options and, where
applicable, explains how to change them.
For information about how to access the Network Configuration menu, see the
“Displaying a Configuration Menu” section on page 4-3.
Before you can change an option on this menu, you must unlock options as
described in the “Unlocking and Locking Options” section on page 4-4. The Edit,
Yes , or No softkeys for changing network configuration options appear only if
options are unlocked.
For information about the keys you can use to edit options, see the “Editing
Values” section on page 4-5.
VLAN settings Admin. VLAN ID allows you to change the
administrative VLAN used by the phone. PC VLAN
allows the phone to interoperate with third-party
switches that do not support a voice VLAN.
Admin. VLAN ID
PC VLAN
Port settings Allow you to set the speed and duplex of the network
and access ports.
SW Port
Configuration
PC Port
Configuration
Table 4-1 Settings Configurable from a Cisco Unified IP Phone (continued)
Category Description
Network
Configuration Menu
Option
To Next Page
Loading...
