Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Model Information Screen
7-2
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Model Information Screen
The Model Information screen includes the options that are described in
Table 7-1.
To display the Model Information screen take either of these actions:
• If the phone is registered with Cisco Unified Communications Manager, press
the Application Menu button, then choose Settings > Model Information.
By default, the Application Menu button is line button 24 (the top left line
button).
• If the phone is not registered with Cisco Unified Communications Manager,
press the Settings softkey and then choose Model Information.
This softkey appears only when the phone is not registered.
To exit the Model Information screen, press the Exit softkey.
Table 7-1 Model Information Settings
Option Description To Change
Model Number Model number of the phone. Display only—Cannot configure.
MAC Address MAC address of the phone. Display only—Cannot configure.
Load File Identifier of the factory-installed
load running on the phone.
Display only—Cannot configure.
Boot Load ID Identifier of the factory-installed
load running on the phone.
Display only—Cannot configure.
Serial Number Serial number of the phone. Display only—Cannot configure.
CTL File Displays the MD5 hash of the
certificate trust list (CTL) file that is
installed in the phone. If no CTL file
is installed on the phone, this field
displays No. (If security is
configured for the phone, the CTL
file installs automatically when the
phone reboots or resets.
For more information about this file,
refer to Cisco Unified
Communications Manager Security
Guide.
To Next Page
Loading...
