Chapter 5 Configuring Features, Templates, Services, and Users
Managing the Cisco Unified CM User Options Web Pages
5-24
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Managing the Cisco Unified CM User Options Web
Pages
From the Cisco Unified CM User Options web page, users can customize and
control several phone features and settings. For detailed information about the
User Options web pages, refer to Cisco Unified IP Phone 7931G for Cisco Unified
Communications Manager 6.0.
Giving Users Access to the Cisco Unified CM User Options Web
Pages
Before a user can access the Cisco Unified CM User Options web pages, you must
use Cisco Unified Communications Manager Administration to add the user to a
standard Cisco Unified Communications Manager end user group. To do so,
choose User Management > User Group. You must also associate appropriate
phones with the user. To perform these procedures, from Cisco
Unified Communications Manager Administration, choose User Management >
End User.
For additional information, refer to Cisco Unified Communications Manager
Administration Guide, “End User Configuration” section.
Specifying Options that Appear on the Cisco Unified CM User
Options Web Pages
Most options on the Cisco Unified CM User Options web pages appear by default.
However, two options that do not appear by default are:
• Show Ring Settings
• Show Line Text Label Settings
You can control the options that appear on the User Options web pages by using
enterprise parameter settings in Cisco Unified Communications Manager
Administration.
To Next Page
Loading...
