Cisco 7931G - Unified IP Phone VoIP - Setting up the Cisco Unified IP Phone

3-1
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
CHAPTER
3
Setting Up the Cisco Unified IP Phone
This chapter includes the following topics, which help you install the
Cisco Unified IP Phone 7931G on an IP telephony network:
• Before You Begin, page 3-2
• Understanding the Cisco Unified IP Phone 7931G Components, page 3-3
• Installing the Cisco Unified IP Phone, page 3-7
• Securing the Phone with a Cable Lock, page 3-9
• Mounting the Phone to the Wall, page 3-11
• Verifying the Phone Startup Process, page 3-12
• Configuring Startup Network Settings, page 3-13
• Configuring Security on the Cisco Unified IP Phone, page 3-13
Note Before you install a Cisco Unified IP Phone, you must decide how to configure
the phone in your network. Then you can install the phone and verify its
functionality. For more information, see Chapter 2, “Preparing to Install the Cisco
Unified IP Phone on Your Network.”