4-23
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Headset
Enabled
Indicates whether the Headset button is
enabled on the phone.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Video
Capability
Enabled
Indicates whether the phone can
participate in video calls when connected
to an appropriately equipped computer.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Recording Tone Indicates whether a recording tone (often
referred to as a beep tone) is enabled or
disabled for the phone. If the recording
tone option is enabled, the phone plays
the beep tone in both directions of every
call, regardless of whether the call
actually gets recorded. The beep tone
first sounds when a call is answered.
You may want to notify your users if you
enable this option.
Default: Disabled
Related Parameters:
• Recording Tone Local Volume
• Recording Tone Remote Volume
• Recording Tone Duration
Other related parameters—Beep tone
frequency in hz, the length of the beep
tone (called duration), and how often the
beep tone plays (called interval)—are
defined on a per-Network Locale basis in
the xml file that defines tones. This xml
file is usually named tones.xml or
g3-tones.xml.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Table 4-8 Media Configuration Menu Options (continued)
Option Description To Change
To Next Page
Loading...
