Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-24
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Recording Tone
Local Volume
Indicates the loudness setting for the
beep tone that is received by the party
whose phone has the Recording Tone
option enabled.
This setting applies for each listening
device (handset, speakerphone, headset).
Range: 0 percent (no tone) to 100 percent
(same level as current volume setting on
the phone).
Default: 100
See also: Recording Tone in this table.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Recording Tone
Remote Volume
Indicates the loudness setting for the
beep tone that the remote party receives.
The remote party is the party who is on a
call with the party whose phone has the
Recording Tone option enabled.
Range: 0 percent to 100 percent. (0
percent is –66 dBM and 100 percent is –3
dBM.)
Default: 84 percent (–10dBM)
See also: Recording Tone in this table.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Table 4-8 Media Configuration Menu Options (continued)
Option Description To Change
To Next Page
Loading...
