4-25
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Recording Tone
Duration
Indicates the length of time in
milliseconds that the beep tone plays. If
the value that you configure here is less
than one third of the interval, this value
overrides the default value that is
provided by the Network Locale.
Range: 0 to 3000
Note For some Network Locales that
use a complex cadence, this
setting applies only to the first
beep tone.
See also: Recording Tone in this table.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Wideband
Headset
Indicates whether wideband is enabled or
disabled for the headset.
Default: Disabled
• If Wideband Headset UI Control is
enabled, you or the user can set this
value from the Settings menu on the
phone by choosing
User Preferences > Audio
Preferences > Wideband Headset.
• If Wideband Headset UI Control is
disabled, set this value from Cisco
Unified Communications Manager
Administration by choosing Device
> Phone > Phone Configuration.
Note Note If you allowed this option
to be user controllable (in the
Wideband Headset UI Control
option), the user-configured
value takes precedence.
Table 4-8 Media Configuration Menu Options (continued)
Option Description To Change
To Next Page
Loading...
