4-15
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-3
• Unlocking and Locking Options, page 4-4
• Editing Values, page 4-5
• Overview of Options Configurable from a Phone, page 4-6
• Device Configuration Menu, page 4-15
Device Configuration Menu
The Device Configuration menu provides access to submenus from which you can
view a variety of settings that are specified in the configuration file for a phone.
(The phone downloads the configuration file from the TFTP server.) These
submenus are:
• CallManager Configuration Menu, page 4-16
• HTTP Configuration Menu, page 4-17
• Locale Configuration Menu, page 4-19
• UI Configuration Menu, page 4-20
• Media Configuration Menu, page 4-22
• Power Save Configuration Menu, page 4-26
PC VLAN Allows the phone to interoperate with
3rd party switches that do not support a
voice VLAN. The Admin VLAN ID
option must be set before you can change
this option.
1. Unlock network configuration
options.
2. Make sure the Admin VLAN ID
option is set.
3. Scroll to the PC VLAN option, press
the Edit softkey, and then enter a
new PC VLAN setting.
4. Press the Validate softkey and then
press the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change
To Next Page
Loading...
