Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding the Cisco Unified IP Phone 7931G
1-4
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
1 Programmable
buttons
Depending on configuration, programmable buttons provide access to phone lines
(line buttons) and intercom lines, speed-dial numbers (speed-dial buttons,
including the BLF speed-dial feature), web-based services (for example, a
Personal Address Book button), call features (for example, Privacy, Conference),
and local features (for example, Application menu, Headset, Settings).
Buttons illuminate to indicate status:
Green, steady—Active call
Green, flashing—Held call
Amber, steady—Privacy in use, whisper state (one-way audio for
intercom call), DND, logged into Hunt Group, headset or other local
feature enabled
Amber, flashing—Incoming call or reverting call
Red, steady—Remote line in use (shared line or BLF status)
Red, flashing—Remote call on hold
Line buttons are numbered 24-1 in descending order, alternating from left to right
By default, the top four buttons are configured as follows:
• Line button 24—Displays the Application menu
• Line button 23—Activates an optional headset
• Line button 22—Displays the Directories menu
• Line button 21—Accesses a voice messaging system
24
22
4
2
23
21
3
1
To Next Page
Loading...
