Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
5-4
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Barge Allows a user to join a non-private call on a
shared phone line. Barge features include
cBarge and Barge.
• cBarge adds a user to a call and converts
it into a conference, allowing the user
and other parties to access conference
features.
• Barge adds a user to a call but does not
convert the call into a conference.
The phones support Barge in two conference
modes:
• Built-in conference bridge at the target
device (the phone that is being barged).
This mode uses the Barge softkey.
• Shared conference bridge. This mode
uses the cBarge softkey.
Note This feature may not be available,
depending on how you configure the
phone. For more information, see the
“Configuring Model-Specific
Features” section on page 5-25.
For more information, refer to:
• Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter.
• Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
• Cisco Unified Communications
Manager Features and Services
Guide, “Barge and Privacy”
chapter.
Block external
to external
transfer
Prevents users from transferring an external
call to another external number.
For more information, refer to Cisco
Unified Communications Manager
Features and Services Guide,
“External Call Transfer Restrictions”
chapter.
Busy Lamp
Field (BLF)
speed dial
Allows a user to monitor the call state of a
directory number (DN) that is associated
with a speed-dial button.
For more information, refer to Cisco
Unified Communications Manager
Features and Services Guide,
“Presence” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference
To Next Page
Loading...
