Cisco 7931G - Unified IP Phone VoIP - Page 155

5-29
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Chapter 5 Configuring Features, Templates, Services, and Users
Configuring Model-Specific Features
• Call feature buttons—In addition to the standard softkeys for redial, transfer,
and hold, the Cisco Unified IP Phone 7931G also has physical buttons for
these features. These buttons function the same as the softkeys on other Cisco
Unified IP Phones.
• Local feature buttons—Some Cisco Unified IP Phones have physical buttons
for Messages, Directories, Services, Settings, Help, and headset. The Cisco
Unified IP Phone 7931G does not have these buttons. Instead, users access
these local features using one of the configurable line keys. You can modify
these assignments, but by default, these include:
– Line key 24—Application menu (to access features except headset)
– Line key 23—Headset
– Line key 22—Directories
– Line key 21—Messages
• Call features—When configuring the partitions and calling search spaces to
support the Cisco Unified IP Phone 7931G, consider which call features are
most critical. The configuration affects the behavior of many call features,
including call forwarding and incoming call handling.
For related configuration information, refer to the “Calling Search Space
Configuration” and the “Partition Configuration” sections in Cisco Unified
Communications Manager Administration Guide.