Appendix A Providing Information to Users Via a Website
How Users Configure Personal Directory Entries
A-6
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Step 3 Click Next.
The License Agreement window appears.
Step 4 Read the license agreement information, and click Yes to accept.
The Choose Destination Location window appears.
Step 5 Choose the directory in which you want to install the application and click Next.
The Start Copying Files window appears.
Step 6 Verify that you have chosen the correct directory, and click Next.
The installation wizard installs the application to your computer. When the
installation is complete, the InstallShield Wizard Complete window appears.
Step 7 Click Finish.
Step 8 To complete the process, you must next configure the Synchronizer.
Configuring the Synchronizer
Step 1 Open the Cisco Unified IP Phone Address Book Synchronizer.
If you accepted the default installation directory, you can open the application by
choosing Start > Programs > Cisco > IP Phone Address Synchronizer.
Step 2 To configure user information, click the Password button.
The Cisco Unified IP Phone User window appears.
Step 3 Enter the Cisco Unified IP Phone user name and password and click OK.
Step 4 To configure synchronization rules, click the Rules Options button.
Step 5 Choose the synchronization method that you want to use and click OK.
Step 6 To configure Cisco Unified Communications Manager information, click the
CCM Server button.
The Configure Cisco Unified Communications Manager Web Server window
appears.
Step 7 Enter the IP address or host name of the Cisco Unified Communications Manager
and click OK.
If you do not have this information, contact your system administrator.
To Next Page
Loading...
