Cisco 7931G - Unified IP Phone VoIP - Page 97

4-13
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
DHCP Enabled Indicates whether DHCP is being used by
the phone.
1. Unlock network configuration
options.
2. Scroll to the DHCP Enabled option
and press the No softkey to disable
DHCP, or press the Ye s softkey to
enable DHCP.
3. Press the Save softkey.
DHCP Address
Released
Releases the IP address assigned by
DHCP.
1. Unlock network configuration
options.
2. Scroll to the DHCP Address
Released option and press the Ye s
softkey to release the IP address
assigned by DHCP, or press the No
softkey if you do not want to release
this IP address.
3. Press the Save softkey.
Alternate TFTP Indicates whether the phone is using an
alternative TFTP server.
1. Unlock network configuration
options.
2. Scroll to the Alternate TFTP option
and press the Yes softkey if the
phone should use an alternative
TFTP server. Press the No softkey
otherwise.
3. Press the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change