Cisco 7941G User Manual

Solution
Barge into the call again.
Cannot Access Settings Menu
Problem
The Settings button is unresponsive.
Cause
Your system administrator may have disabled on your phone.
Solution
Contact your system administrator.
Cannot Use CallBack
Problem
CallBack fails.
Cause
The other party might have Call Forward enabled.
Call Forward All Error Message
Problem
The phone shows an error message when you attempt to set up Call Forward All.
Cause
Your phone may reject your attempt to set up Call Forward All directly on the phone if the target number that
you enter would create a Call Forward All loop or would exceed the maximum number of links permitted in
a Call Forward All chain (also known as a maximum hop count).
Solution
Contact your system administrator for details.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
105
Troubleshooting
Cannot Access Settings Menu

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g