Energy Savings
Your phone supports the Cisco EnergyWise program. Your system administrator sets up sleep (power down)
and wake (power up) times for your phone to save energy.
Ten minutes before the scheduled sleep time, if the audible alert is enabled by your system administrator, you
hear your ringtone play. The ringtone plays according to the following schedule:
•
At 10 minutes before power down, the ringtone plays four times
•
At 7 minutes before power down, the ringtone plays four times
•
At 4 minutes before power down, the ringtone plays four times
•
At 30 seconds before power down, the ringtone plays 15 times or until the phone powers down
If your phone is inactive (idle) at the sleep time, you see a message to remind you that your phone is going
to power down. To keep the phone active, press any key on the phone. If you do not press any key, your phone
powers down.
If your phone is active (for example, on a call), your phone waits until it has been inactive for a period of time
before informing you of the pending power shutdown. Before the shutdown happens, you see a message to
remind you that your phone is going to power down.
At the scheduled time, your phone powers up. To wake up the phone before the scheduled time, contact your
administrator.
Wake and sleep times are also linked to the configured days that you normally work. If your requirements
change (for example, your work hours or work days change), see your system administrator to have your
phone reconfigured.
For more information about EnergyWise and your phone, see your system administrator.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
11
Phone Features
Energy Savings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
