Cisco 7941G

CHAPTER 4
Handset, Headset, and Speakerphone
•
Headset, Handset, and Speaker Overview, page 61
•
Handset, page 61
•
Headset, page 62
•
Speakerphone, page 63
•
AutoAnswer with Headset or Speakerphone, page 63
Headset, Handset, and Speaker Overview
You can use your phone with these audio devices: a handset, headset, or speakerphone.
The phone is off-hook when the handset is lifted or another audio device is in use.
The phone is on-hook when the handset is in its cradle and other audio devices are not in use.
Handset
The following table describes how to use the handset.
Then...If you want to...
Lift it to go off-hook; replace it to go on-hook.
The ringing line is automatically selected. Contact your system
administrator about options to always select the primary line.
Use the handset
Press or ( ), then hang up the handset.
Switch to the speakerphone or a
headset during a call
Press the Volume button during a call or after invoking a dial tone.
Press Save to preserve the volume level for future calls.
Adjust the volume level for a call
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
61