Cisco 7941G User Manual

Create Conference by Calling Participants
Procedure
Step 1
From a connected call, press Confrn or Conference. You may need to press the more softkey to see Confrn.
Step 2
Enter the phone number of the participant.
Step 3
Wait for the call to connect.
Step 4
Press Confrn or Conference again to add the participant to your call.
Step 5
Repeat to add additional participants.
Add New Participants to Conference
Your system administrator determines whether noninitiators of a conference can add or remove participants.
Procedure
Step 1
From a connected call, press Confrn or Conference. You may need to press the more softkey to see Confrn.
Step 2
Enter the phone number of the participant.
Step 3
Wait for the call to connect.
Step 4
Press Confrn or Conference again to add the participant to your call.
Step 5
Repeat to add additional participants.
Join Conference
Join allows you to combine two or more existing calls to create a conference in which you are a participant.
Tips
•
If you frequently join more than two parties into a single conference, you may find it useful to first select
the calls that you want to join together, and then press Join to complete the action.
•
When Join completes, the caller ID changes to Conference.
•
You may be able to combine multiple conference calls by using the Join or DirTrfr softkeys. Contact
your system administrator to see if this feature is available to you.
•
A Call Chaperone user can conference only the first caller. Subsequent callers can be conferenced by
the other participants in the conference.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
37
Calling Features
Join Conference

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g