Cisco 7941G

Set Up DND Settings
If your system administrator configured DND settings to appear on the User Options page, perform these
steps:
Procedure
Step 1
Log in to your User Options web pages.
Step 2
From the drop-down menu, choose User Options > Device.
Step 3
You can set the following options:
•
Do Not Disturb: Set to enable/disable DND.
•
DND Option: Choose either Call Reject (to turn off all audible and visual notifications) or Ringer Off
(to turn off only the ringer).
•
DND Incoming Call Alert (applies to either DND option set): Set the alert to beep only, flash only,
disable the alert, or choose “None” (to use the “Alert” setting configured by your system administrator).
Conference Calls
The Cisco Unified IP Phone allows you to talk simultaneously with multiple parties in a conference call.
You can create a conference in various ways, depending on your needs and the features that are available on
your phone.
• Conference—Enables you to create a standard (ad hoc) conference by calling each participant. Use the
Confrn softkey or the Conference button. Conference is available on most phones.
• Join—Enables you to create a standard (ad hoc) conference by combining existing calls. Use the Join
softkey or button.
• cBarge—Enables you to create a standard (ad hoc) conference by adding yourself to a call on a shared
line. Press a line button or use the cBarge softkey or button. cBarge is only available on phones that use
shared lines.
• Meet Me—Enables you to create or join a conference by calling a conference number. Use the MeetMe
softkey or button.
Ad Hoc Conference
Conference allows you to call each participant. Conference is available on most phones.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
36
Calling Features
Set Up DND Settings