Dial from Call Log (While Not on Another Call)
Procedure
Step 1
Press .
Step 2
Choose one of the following entries:
•
Missed Call
•
Placed Calls
•
Received Calls
Step 3
Highlight a call record.
If the Details softkey appears, the call is the primary entry of a multiparty
call.
Note
Step 4
To edit the displayed number, press EditDial followed by << or >>.
Step 5
To delete the number, press EditDial followed by Delete. You may need to press the more softkey to display
Delete.
Step 6
Go off-hook to place the call.
Dial from Call Log (While Connected to Another Call)
Procedure
Step 1
Press .
Step 2
Choose one of the following entries:
•
Missed Call
•
Placed Calls
•
Received Calls
Step 3
Highlight a call record.
If the Details softkey appears, the call is the primary entry of a multiparty
call.
Note
Step 4
To edit the displayed number, press EditDial followed by << or >>.
Step 5
To delete the number, press EditDial followed by Delete. You may need to press the more softkey to display
Delete.
Step 6
Press Dial.
Step 7
Choose a menu item to handle the original call:
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
72
Call Logs and Directories
Dial from Call Log (While Not on Another Call)