Cisco 7941G

Tips
•
EM automatically logs you out after a certain amount of time. Your system administrator establishes
this time limit.
•
Changes that you make to your EM profile from your Cisco Unified Communications Manager User
Options web pages take effect immediately if you are logged in to EM on the phone; otherwise, changes
take effect the next time you log in.
•
Changes that you make to the phone from your User Options web pages take effect immediately if you
are logged out of EM; otherwise, changes take effect after you log out.
•
Local settings controlled by the phone are not maintained in your EM profile.
Log In to EM
Procedure
Step 1
Choose > EM Service (name can vary).
Step 2
Enter your user ID and PIN provided by your system administrator.
Step 3
If prompted, select a device profile.
Log Out of EM
Procedure
Step 1
Choose > EM Service (name can vary).
Step 2
When prompted to log out, press Yes.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
55
Calling Features
Cisco Extension Mobility