Cisco 7962 User Manual

•
Hold: Puts the first call on hold and dials the second.
•
Transfer: Transfers the first party to the second and drops you from the call. Press Transfer again after
dialing to complete the action.
•
Conference: Creates a conference call with all parties, including you. Press Confrn or Conference
again after dialing to complete the action.
•
EndCall: Disconnects the first call and dials the second call.
Place Call from URL Entry in Call Log
Supported only on SIP phones.
Procedure
Step 1
Press .
Step 2
Choose one of the following entries:
•
Missed Call
•
Placed Calls
•
Received Calls
Step 3
Highlight the URL entry that you want to dial.
Step 4
If you need to edit the entry, press EditDial.
The icon appears to indicate that you can begin editing characters in the URL entry.
Step 5
Press Dial.
Redial International Call from Missed and Received Call Logs
Procedure
Step 1
Press .
Step 2
Choose one of the following entries:
•
Missed Call
•
Received Calls
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
73
Call Logs and Directories
Place Call from URL Entry in Call Log

Cisco 7962 Specifications

General

Line Keys	6
Headset Jack	Dedicated headset port
Weight	3.5 lbs
Ethernet	10/100BASE-T Ethernet connection through 2-port switch
Protocol Support	SCCP, SIP
Power	IEEE 802.3af PoE
Speakerphone	Full-duplex speakerphone
Supported Codecs	G.711, G.729a, G.729ab, G.722
Display	320 x 222 pixel, 4-bit grayscale graphical LCD
Audio	Handset, headset, and speakerphone