Figure 18: Cisco Headset 561 and 562 Headset Buttons
The following table describes the Cisco Headset 561 and 562 Headset buttons.
Table 22: Cisco Headset 561 and 562 Headset Buttons
DescriptionNameNumber
Use to power the headset on and off.
Press and hold for 4 seconds to power on and off the headset.
Incoming and active call management depends upon if you have one call
or multiple calls.
One call:
• Press once to answer incoming calls.
• Press once to put an active call on hold. Press again to retrieve a call
from hold.
• Press twice to reject an incoming call.
• Press and hold to end an active call.
Multiple calls:
• Press once to put an active call on hold, and to answer a second
incoming call.
• Press once to put a current call on hold. Press again to resume a call,
or press and hold for 2 seconds to end the current call and to resume
a held call.
• Press and hold to end an active call, and to answer another incoming
call.
• Press twice to stay on a current call, and to reject a second incoming
call.
Power and Call button1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
