Your phone does not save the authorization code, billing code, or extra digits from the speed dial in the call
history. If you press Redial after you connect to a speed-dial destination, the phone prompts you to enter any
required authorization code, billing code, or additional digits manually.
Example
To set up a speed-dial number to call a person at a specific extension, and if you need an authorization code
and billing code, consider the following requirements:
• You need to dial 9 for an outside line.
• You want to call 5556543.
• You need to input the authorization
code 1234.
• You need to input the billing
code 9876.
• You must wait for 4 seconds.
• After the call connects, you must dial the extension 56789#.
In this scenario, the speed-dial number is 95556543,1234,9876,,56789#.
Related
Topics
Calls That Require a Billing Code
or Authorization Code, on page 43
Buttons and Hardware
The Cisco IP Phone 8800 Series has two distinct hardware types:
• Cisco IP Phones 8811, 8841, 8851, 8851NR, and 8861—do not have a camera.
• Cisco IP Phones 8845, 8865, and 8865NR—have a built-in camera.
The following figure shows the Cisco IP Phone 8845.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
