USB Ports
Your phone may have one or more USB ports. Each USB port supports a maximum of five USB devices.
Each device connected to the port is included in the maximum device count, including any Key Expansion
Modules.
For example, your phone can support five USB devices on the side port and five additional standard USB
devices on the back port. Many third-party USB products contain more than one USB device, and thus count
as more than one device.
If you use a USB hub and remove the USB cable from the phone during an active call, your phone might
restart.
Related Topics
The Cisco IP Phone 8800 Series, on page 1
Mobile Device Charging
You can use the USB ports on your phone to charge your mobile device if the device has a USB connection.
The following ports support USB charging:
• Side port—Provides standard device charging.
• Back port (Cisco IP Phone 8861, 8865, and 8865NR only)—Provides standard device charging as well
as fast-charging.
Your phone continues to charge the mobile device while it is in power-saving mode but stops charging in
Power Save Plus mode.
When you use your phone to charge your mobile device, the following conditions apply:
• A short delay may occur before charging begins.
• In some situations, your device will not display the charging icon. For example, the icon may not display
when the device is fully charged.
• When more than one Cisco IP Phone 8800 Key Expansion Module is attached to your phone, the back
USB port cannot fast-charge the device.
If you unplug your tablet and immediately plug in a USB headset to the phone, a 3-second delay occurs before
the phone recognizes the USB headset.
Related Topics
Energy Savings, on page 32
Chinese Language Support
You can input Chinese characters and have Chinese displays on your phone by selecting 拼音. This feature
is supported on speed dial, call history, and personal and corporate directories.
This feature is supported on both the phone and the key expansion modules. But, it is only available in Asian
countries and only Chinese (China) is supported. Chinese input is based on the Pinyin input method, which
is common to PCs and mobile phones in many Asian countries.
This feature requires the Chinese locale installer, but it does not require any additional configuration.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
