Cisco 8851NR User Manual

Procedure
Step 1 Press Applications .
Step 2 Select Bluetooth.
Step 3 Press On or Off.
Add a Bluetooth Headset
Procedure
Step 1 Make your Bluetooth headset discoverable.
Step 2 Press Applications .
Step 3 Select Bluetooth > Add Bluetooth device.
Your phone searches for discoverable accessories.
Step 4 Select your headset and press Connect.
Step 5 (Optional) If prompted, enter the PIN for your headset.
Disconnect a Bluetooth Headset
You should disconnect your Bluetooth headset before you use it with another device.
Procedure
Step 1 Press Applications .
Step 2 Select Bluetooth.
Step 3 Select a Bluetooth headset.
Step 4 Press Disconnect.
Remove a Bluetooth Headset
Remove your Bluetooth headset if you aren't going to use it with your phone again.
Procedure
Step 1 Press Applications .
Step 2 Select Bluetooth.
Step 3 Select a Bluetooth headset and press Delete.
CISCO 8800 SERIES
USER GUIDE
GoMomentum.com
888.538.3690
109

Cisco 8851NR Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	Acrylonitrile butadiene styrene (ABS)
Product color	Charcoal
Wall mountable	Yes
Lines quantity	5 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Volume control	Digital
Display diagonal	5 \
Display resolution	800 x 480 pixels
Voice codecs	G.711Mu, G.711a, G.722, G.729A, iLBC
Number of microphones	1
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	IEEE 802.3i/802.3u/802.3ab
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Number of handles included	- pc(s)

Weight and Dimensions

Depth	257.34 mm
Width	229.1 mm
Height	40 mm
Weight	1190 g