Make a Call with a Speed-Dial Button
To check which phone model you have, press Applications and select Phone information. The Model
number field shows your phone model.
You can see only as many speed-dial numbers as you have speed-dial buttons. For example, you add 15
speed-dial numbers in the Self Care portal but your phone has five speed-dial buttons. You can see only the
first five speed-dial numbers from the list of speed-dial numbers in your Self Care portal.
When you add features to your phone, some features require a line button. But each line button on your phone
can support only one function (a line, a speed dial, or a feature). If your phone's line buttons are already in
use, your phone won't display any additional features.
You can see all the speed-dial numbers that you add in the Self Care portal. Use your navigation cluster to
scroll through your numbers and select a speed-dial number.
Before you begin
Set up speed-dial codes in the Self Care portal.
Procedure
Press a speed-dial button .
Related Topics
Self Care Portal, on page 13
Add a Speed Dial Button from Your Phone
You can configure a speed dial button from your phone, if you cannot access the Self Care Portal.
This feature is supported on the Cisco IP Phones 8800 Series and the following key expansion modules:
• Cisco IP Phone 8800 Key Expansion Module
• Cisco IP Phone 8851/8861 Key Expansion Module
• Cisco IP Phone 8865 Key Expansion Module
A Reset All clears any speed-dial buttons that are created from your phone.
Procedure
Step 1
Step 2
Step 3
Step 4
Press and hold a line key for 2 seconds.
In the Name field, enter the name of the speed-dial number.
In
the Number field, enter the phone number. Include all the digits required to complete the call.
Select Apply to save your speed-dial number.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
