DescriptionFeatures
Specify the additional phones such as your mobile phone that you want to use to make
and receive calls with the same directory numbers as your desk phone. You can also
define blocked and preferred contacts to restrict or allow calls from certain numbers
to be sent to your mobile phone. When you set up additional phones, you can also set
up these features:
• Single number reach—Specify whether the additional phone should ring when
someone calls your desk phone.
• Mobile calls—If the additional phone is a mobile phone, you can set it up to allow
you to transfer mobile calls to your desk phone or desk phone calls to your mobile
phone.
Additional phones
Assign phone numbers to speed-dial numbers so that you can quickly call that person.Speed dial
Related Topics
Phone Calls with Mobile Connect, on page 68
Speed Dial, on page 39
Forward Calls, on page 53
Speed-Dial Numbers
When you dial a number on your phone, you enter a series of digits. When you set up a speed-dial number,
the speed-dial number must contain all the digits you need to make the call. For example, if you need to dial
9 to get an outside line, you enter the number 9 and then the number you want to dial.
You can also add other dialed digits to the number. Examples of additional digits include a meeting access
code, an extension, a voicemail password, an authorization code, and a billing code.
The dial string can contain the following characters:
• 0 to 9
• Pound (#)
• Asterisk (*)
• Comma (,)—This is the pause character, and gives a 2- second delay in the dialing. You can have several
commas in a row. For example, two commas (,,) represent a pause of 4 seconds.
The rules for dial strings are:
• Use the comma to separate the parts of the dial string.
• An authorization code must always precede a billing code in the speed-dial string.
• A single comma is required between the authorization code and the billing code in the string.
• A speed-dial label is required for speed dials with authorization codes and additional digits.
Before you configure the speed dial, try to dial the digits manually at least once to ensure that the digit sequence
is correct.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
