Shift buttons—2 buttons. The button for page 1 is labeled as 1 and the button for page 2 is labeled
as 2. The lights in each button indicate the state of the page as follows:
• green steady LED—Page is in view.
• light off—Page is not in view.
• amber steady LED—Page is not in view with one or more alerting calls on the
page.
2
Your administrator sets up the key expansion module to display in one-column or two-column mode.
One-Column Mode
In one-column mode, each row in the display corresponds to one line. You can access this line by either
the button on the left or the button on the right. In this configuration, the key expansion module displays
nine lines on page 1, and nine lines on page 2.
Figure 27: Key Expansion Module with One Column
Two-Column Mode
If you are using a single-LCD screen expansion module, you can set up the module in two-column mode.
In two-column mode, each button on the left and right of the screen is assigned to a different phone
number, speed-dial number (or name or other text label), phone service, or phone feature. In this
configuration, the key expansion module displays up to 18 items on page 1, and up to 18 items on page
2
To Next Page
Loading...
