Cisco 8861 - Page 393

DescriptionParameter
When a tel URL is converted to a SIP URL and the
phone number is represented by the user portion of
the URL, the SIP URL includes the optional :
user=phone parameter (RFC3261). For example:
To: sip:+12325551234@example.com; user=phone
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<User_Equal_Phone_1_
ua="na">Yes</User_Equal_Phone_1_>
• In the phone web page, select Yes to enable this
feature.
Allowed values: Yes|No
Default: No
User Equal Phone
Determines the type of recording protocol that the
phone uses. Options are:
• SIPINFO
• SIPREC
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Call_Recording_Protocol_1_
ua="na">SIPREC</Call_Recording_Protocol_1_>
• In the phone web page, select a protocol from
the list.
Allowed values: SIPREC|SIPINFO
Default: SIPREC
Call Recording Protocol
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
373
Cisco IP Phone Installation
Parameters for SIP Settings on Extensions