Cisco 8961 User Manual

Your Phone
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 7.1(3) (SIP) 5
Phone Display Viewing Angle
The viewing angle of the phone display can be adjusted according to your preference.
Change Display Viewing Angle
Hold the handset and cradle with your left hand, hold the right side of the bezel (to the right of the
display) with your right hand, and then move your hands back and forth in opposite directions to
adjust the angle. (The Cisco Unified IP Phone 9971 is shown for illustrative purposes.)
Buttons and Hardware
Your phone provides quick access to your phone lines, features, and call sessions:
• Use the feature buttons (on the left) to view calls on a line or access features such as speed dial or
All Calls.
• Use the call session buttons (on the right) to perform tasks such as making a call, answering a call,
or resuming a held call. Each call on your phone is associated with a session button.
193119

Cisco 8961 Specifications

General

Resolution	640 x 480 pixels
Display	5-inch TFT color display
Ethernet	10/100/1000 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE) Class 3
Connectivity	Two-port Gigabit Ethernet switch
Buttons	4 softkeys
USB Port	Yes, supports USB 2.0
Headset Jack	Yes, dedicated headset port
Speakerphone	Full-duplex speakerphone
Codec Support	G.711, G.722, G.729, iLBC
Security	802.1X authentication, TLS, SRTP, HTTPS