EasyManua.ls Logo

Cisco 8961 - Switch an In-Progress Call from a Mobile Phone to Your Desk Phone; Mute; Mute Your Phone; On-Hook Dialing

Cisco 8961
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
86 OL-19963-01
Switch an In-Progress Call From a Mobile Phone to Your Desk Phone
1. Select a line on your desk phone.
2. Hang up the call on your mobile phone to disconnect the mobile phone, but not the call.
3. Press the Resume softkey on your desk phone within five to 10 seconds and start talking on the
desk phone.
Mute
Mute allows you to block audio input for your handset, headset, and speakerphone, so that you can
hear other parties on the call but they cannot hear you.
Mute Your Phone
1. Press the Mute button to turn Mute on.
Visual confirmation displays.
2. Press the Mute button again to turn Mute off.
On-hook Dialing
On-hook dialing allows you to enter a phone number before getting a dial tone and to complete the
call by going off-hook.
Dial a Number On-hook
1. Enter or speed-dial a phone number.
When you dial on-hook, the On-Hook Dialing screen displays.
2. Press Call after entering digits. If you are specifying an Abbreviated Dial, enter the abbreviated
number and then press Speed Dial.
3. Go off hook.

Table of Contents

Other manuals for Cisco 8961

Related product manuals