Cisco 8961 User Manual

Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 7.1(3) (SIP) vii
Determine if a Shared Line is on Hold 80
Remote Hold 81
Hold Reversion 81
Respond to a Hold Reversion Notification 81
Hunt Groups 81
Sign In and Out of a Hunt Group 81
Intercom 82
Place a Dedicated Intercom Call 82
Place a Dialable Intercom Call 82
Receive an Intercom Call 82
Line Status 83
Line Status Indicators 83
Malicious Call Identification 84
Trace a Suspicious Call 84
Meet Me 84
Host a Meet-Me Conference 84
Join a Meet-Me Conference 84
Mobile Connect 85
Turn On or Off Mobile Connect to All Your Remote Destinations From Your Desk Phone 85
Switch an In-Progress Call on Your Desk Phone to a Mobile Phone 85
Switch an In-Progress Call From a Mobile Phone to Your Desk Phone 86
Mute 86
Mute Your Phone 86
On-hook Dialing 86
Dial a Number On-hook 86
Privacy 87
Enable Privacy on a Shared Line 87
Quality Reporting Tool 87
Report Problems on Your Phone 87
Redial 87
Redial a Number 88
Shared Lines 88
Silent Monitoring and Recording 88
Speed Dial 89

Cisco 8961 Specifications

General

Resolution	640 x 480 pixels
Display	5-inch TFT color display
Ethernet	10/100/1000 Mbps
Power	IEEE 802.3af Power over Ethernet (PoE) Class 3
Connectivity	Two-port Gigabit Ethernet switch
Buttons	4 softkeys
USB Port	Yes, supports USB 2.0
Headset Jack	Yes, dedicated headset port
Speakerphone	Full-duplex speakerphone
Codec Support	G.711, G.722, G.729, iLBC
Security	802.1X authentication, TLS, SRTP, HTTPS