Cisco A9K-SIP-700 User Manual

----------------------------------------------------------------------------------------------
A9K-MPA-1X40GE EP Sage spa fpga7 1.03 0.00 0.0
----------------------------------------------------------------------------------------------
A9K-MPA-8X10GE EP I/O FPGA spa fpga8 0.07 0.00 0.0
----------------------------------------------------------------------------------------------
SPA-8XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.00 0.5
----------------------------------------------------------------------------------------------
SPA-8XCHT1/E1 SPA I/O FPGA spa fpga1 2.08 0.00 0.0
SPA ROMMON spa rommon 2.12 0.00 0.140
----------------------------------------------------------------------------------------------
SPA-OC192POS-XFP SPA FPGA swv1.2 hwv2 spa fpga1 1.02 0.00 2.0
----------------------------------------------------------------------------------------------
SPA-2XOC48POS/RPR SPA FPGA swv1.0 spa fpga1 1.00 0.00 0.0
----------------------------------------------------------------------------------------------
SPA-4XOC48POS/RPR SPA FPGA swv1.0 spa fpga1 1.00 0.00 0.0
----------------------------------------------------------------------------------------------
SPA-8XOC3-POS SPA FPGA swv1.0 spa fpga1 1.00 0.00 0.5
----------------------------------------------------------------------------------------------
SPA-2XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.00 0.5
----------------------------------------------------------------------------------------------
SPA-4XOC12-POS SPA FPGA swv1.0 spa fpga1 1.00 0.00 0.5
----------------------------------------------------------------------------------------------
SPA-10X1GE-V2 SPA FPGA swv1.10 spa fpga1 1.10 0.00 0.0
----------------------------------------------------------------------------------------------
SPA-5X1GE-V2 SPA FPGA swv1.10 spa fpga1 1.10 0.00 0.0
----------------------------------------------------------------------------------------------
SPA-1X10GE-L-V2 SPA FPGA swv1.9 spa fpga1 1.09 0.00 0.0
----------------------------------------------------------------------------------------------
SPA-4XOC3-POS-V2 SPA FPGA swv1.0 spa fpga1 1.00 0.00 0.5
----------------------------------------------------------------------------------------------
SPA-1X10GE-WL-V2 SPA FPGA swv1.9 spa fpga1 1.09 0.00 0.0
----------------------------------------------------------------------------------------------
SPA-1XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.00 0.0
----------------------------------------------------------------------------------------------
SPA-2XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.00 0.0
----------------------------------------------------------------------------------------------
SPA-3XOC3-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.00 0.0
----------------------------------------------------------------------------------------------
SPA-1XOC12-ATM-V2 SPA FPGA swv1.2 spa fpga1 2.02 0.00 0.0
----------------------------------------------------------------------------------------------
In the show fpd package command output, the “subtype” column shows the FPDs that correspond with
each SPA image. To upgrade a specific FPD with the upgrade hw-module fpd command, replace the
fpga-type argument with the appropriate FPD from the “subtype” column, as shown in the following
example:
RP/0/RSP0/CPU0:router(admin)# upgrade hw-module fpd fpga2 location 0/3/1 reload
Note
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
186
Upgrading FPD
show fpd package Command Output: Example

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English