snmp-server view SNMP_VIEW1 1.3.6.1.2.1.1.5 excluded
Verifying Configured Views
This example shows how to display information about the configured views:
RP/0/RSP0/CPU0:router# show snmp view
v1default 1.3.6.1 - included nonVolatile active
SNMP_VIEW1 1.3.6.1.2.1.1 - included nonVolatile active
SNMP_VIEW1 1.3.6.1.2.1.1.5 - excluded nonVolatile active
Creating Groups
If you do not explicitly specify a notify, read, or write view, the Cisco IOS XR software uses the v1 default
(1.3.6.1). This example shows how to create a group that utilizes the default view:
RP/0/RSP0/CPU0:router(config)# snmp-server group group-name v3 auth
The following configuration example shows how to create a group that has read access to all the OIDs in the
system except the sysUpTime object (1.3.6.1.2.1.1.3), which has been excluded from the view applied to the
group, but write access only to the sysName object (1.3.6.1.2.1.1.5):
!
snmp-server view view_name1 1.3.6.1.2.1.1 included
snmp-server view view_name1 1.3.6.1.2.1.1.3 excluded
snmp-server view view_name2 1.3.6.1.2.1.1.5 included
snmp-server group group_name1 v3 auth read view_name1 write view_name2
!
Verifying Groups
This example shows how to verify the attributes of configured groups:
RP/0/RSP0/CPU0:router# show snmp group
groupname: group_name1 security model:usm
readview : view_name1 writeview: view_name2
notifyview: v1default
row status: nonVolatile
Creating and Verifying Users
Given the following SNMPv3 view and SNMPv3 group configuration:
!
snmp-server view view_name 1.3.6.1.2.1.1 included
snmp-server group group_name v3 noauth read view_name write view-name
!
This example shows how to create a noAuthNoPriv user with read and write view access to a system group:
config
snmp-server user noauthuser group_name v3
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
376
Implementing SNMP
Configuring SNMPv3: Examples
To Next Page
Loading...
Need help?
General
