Cisco ASR 1000 Series Configuration Guide

FD Watched Present Select Present
0 --- --- R-- R--
Step 9
show udp [detail]
To display IP socket information about UDP processes, use the show udp command. The following example shows
how to display detailed information about UDP sockets:
Example:
Router# show udp detail
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 10.0.0.0 0 10.0.21.70 67 0 0 2211 0
Queues: output 0
input 0 (drops 0, max 50, highwater 0)
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 10.0.0.0 0 10.0.21.70 2517 0 0 11 0
Queues: output 0
input 0 (drops 0, max 50, highwater 0)
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 10.0.0.0 0 10.0.21.70 5000 0 0 211 0
Queues: output 0
input 0 (drops 0, max 50, highwater 0)
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 10.0.0.0 0 10.0.21.70 5001 0 0 211 0
Queues: output 0
input 0 (drops 0, max 50, highwater 0)
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 10.0.0.0 0 10.0.21.70 5002 0 0 211 0
Queues: output 0
input 0 (drops 0, max 50, highwater 0)
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 10.0.0.0 0 10.0.21.70 5003 0 0 211 0
Queues: output 0
input 0 (drops 0, max 50, highwater 0)
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 10.0.0.0 0 10.0.21.70 5004 0 0 211 0
Queues: output 0
input 0 (drops 0, max 50, highwater 0)
Step 10
show ip traffic
To display IP protocol statistics, use the show ip traffic command. The following example shows that the IP traffic
statistics have been cleared by the clear ip traffic command:
Example:
Router# clear ip traffic
Router# show ip traffic
IP statistics:
Rcvd: 0 total, 0 local destination
0 format errors, 0 checksum errors, 0 bad hop count
0 unknown protocol, 0 not a gateway
0 security failures, 0 bad options, 0 with options
Opts: 0 end, 0 nop, 0 basic security, 0 loose source route
0 timestamp, 0 extended security, 0 record route
0 stream ID, 0 strict source route, 0 alert, 0 cipso
0 other
Frags: 0 reassembled, 0 timeouts, 0 couldn't reassemble
0 fragmented, 0 couldn't fragment
Bcast: 0 received, 0 sent
Mcast: 0 received, 0 sent
Sent: 0 generated, 0 forwarded
Drop: 0 encapsulation failed, 0 unresolved, 0 no adjacency
0 no route, 0 unicast RPF, 0 forced drop
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
16
Configuring IP Services
Monitoring and Maintaining the IP Network

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English