Cisco ASR 1001-X Installation Guide

Contents
iv
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-03
Cisco ASR 1001-X Router DC Power Supply 2-7
AC/DC Power System Input Range and Voltage for the Cisco ASR 1001-X Router 2-8
Power Cords Supported by the Cisco ASR 1001-X Router 2-8
Preparing Your Site for Installation 3-1
Prerequisites and Preparation 3-1
Site Planning Checklist 3-2
Safety Guidelines 3-2
Safety Warnings 3-2
Safety Recommendations 3-3
Compliance Requirements 3-3
Cautions and Regulatory Compliance Statements for NEBS 3-4
Standard Warning Statements 3-5
General Safety Warnings 3-5
Site Planning 3-8
General Precautions 3-8
Site Selection Guidelines 3-9
Site Environmental Requirements 3-9
Physical Characteristics 3-10
Site Power Guidelines 3-11
Electrical Circuit Requirements 3-11
Site Cabling Guidelines 3-12
Console Port Connections 3-13
Interference Considerations 3-13
Rack-Mounting Guidelines 3-15
Precautions for Rack-Mounting 3-15
General Rack-Selection Guidelines 3-15
Guidelines for 23-in. (Telco) Racks 3-16
Equipment Rack Guidelines 3-16
Preventing Electrostatic Discharge Damage 3-17
Electrical Safety 3-18
Chassis-Lifting Guidelines 3-18
Tools and Equipment 3-19
Unpacking and Verifying Shipping Contents 3-19
Checking the Shipping Container Contents 3-19
Cisco ASR 1001-X Router Installation Checklist 3-20
Cisco ASR 1001-X Router Installation 4-1
Installation Methods 4-1

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g