Cisco ASR 1001-X Installation Guide

Contents
v
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-03
Guidelines for a Standalone Equipment Shelf or Tabletop Installation 4-2
Steps for Installing the Cisco ASR 1001-X Router on a Standalone Equipment Shelf or Tabletop
Installation
4-2
General Guidelines for Rack Installation 4-3
Rack-Mounting the Cisco ASR 1001-X Router 4-4
Verifying Rack Dimensions 4-4
Attaching the Chassis Rack-Mount Brackets 4-5
Chassis Front Rack-Mount Brackets 4-5
Mounting the Cisco ASR 1001-X Router in the Rack 4-6
Two-Post Rack Installation 4-6
Four-Post Rack Installation 4-8
Attaching the Cable Management Bracket 4-9
Attaching a Chassis Ground Connection 4-10
Recommended Tools and Supplies 4-10
Connecting Cables 4-12
Connecting the Console and Auxiliary Port Cables 4-12
Connecting to the Mini USB Console Port 4-13
Management Ethernet Port Cable Connection 4-14
Connecting the Built-in 1 GE SFP and 10 GE SFP+ Port Cables 4-14
Built-in 1 Gigabit Ethernet Port 4-14
Built-in 10 Gigabit Ethernet Port 4-14
Connecting the Shared Port Adapter Cables 4-15
Cisco ASR 1001-X Router Power Up and Initial Configuration 5-1
Checking Conditions Prior to System Startup 5-1
Powering Up the Cisco ASR 1001-X Router 5-2
Performing the Initial Configuration on the Router 5-4
Using the Cisco setup Command Facility 5-4
Completing the Configuration 5-7
Using the Cisco IOS-XE CLI—Manual Configuration 5-7
Configuring the Router Hostname 5-8
Configuring the Enable and Enable Secret Passwords 5-8
Configuring the Console Idle Privileged EXEC Timeout 5-10
Gigabit Ethernet Management Interface Overview 5-11
Default Gigabit Ethernet Configuration 5-12
Configuring Gigabit Ethernet Interfaces 5-12
Saving Your Router Configuration 5-13
Verifying the Initial Configuration 5-14
Powering Off the Cisco ASR 1001-X Router Safely 5-14

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g