Cisco ASR 1001-X

Contents
vi
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-03
Environmental Monitoring and Reporting Functions 5-15
Cisco ASR1001-X Router Alarm Monitoring 5-16
Environmental Monitoring 5-16
Fan Failures 5-18
Reporting Functions 5-18
Cisco ASR 1001-X Router License Verification 6-1
Viewing the Cisco IOS License Level 6-1
Configuring the Throughput Level 6-2
Viewing License Information 6-3
Per Port Counted License (10-GE Interfaces) 6-7
10-GE Interface Evaluation License Features 6-9
Removing and Replacing FRUs from the Cisco ASR 1001-X Router 7-1
Removing and Replacing the Cisco ASR 1001-X Router Power Supplies 7-1
Removing AC Power Supplies from the Cisco ASR 1001-X Router 7-2
Installing AC Power Supplies in the Cisco ASR 1001-X Router 7-3
Removing DC Input Power from the Cisco ASR 1001-X Router 7-5
Installing DC Input Power on the Cisco ASR 1001-X Router 7-6
Wiring the DC Input Power Source 7-6
Removing and Replacing Cisco ASR 1001-X Router USB Flash Memory Stick or Secure Token 7-8
Removing and Replacing the Cisco ASR 1001-X Router DIMM 7-9
Removing and Replacing the Cisco ASR 1001-X Router DIMM Memory Module 7-9
Removing a Cisco ASR 1001-X Router DIMM 7-11
Replacing a Cisco ASR 1001-X Router DIMM 7-12
Removing and Replacing a Cisco ASR 1001-X Router SPA 7-14
Electrostatic Discharge Prevention 7-15
Removing a Shared Port Adapter 7-16
Replacing a Shared Port Adapter 7-16
Removing and Replacing a NIM on the Cisco ASR 1001-X Router 7-17
Removing a NIM 7-18
Replacing a NIM 7-18
Removing and Replacing an SSD from the NIM-SSD Module 7-19
Removing an SSD from the NIM-SSD Module 7-19
Installing an SSD into the NIM-SSD Module 7-21
Repacking the Router 7-22
Upgrading the ROMMON and CPLD 8-1
Upgrading the ROMMON 8-1
Compatibility Requirements 8-1