Cisco ASR 9001 Hardware Installation Guide

ITU GridWavelengthDescriptionPart Number
481539.98 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-38.98
491538.19 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-38.19
501537.39 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-37.39
511536.61 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-36.61
521535.82 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-35.82
531535.04 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-35.04
541534.25 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-34.25
551533.46 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-33.46
561532.68 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-32.68
571531.90 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-31.90
581531.12 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-31.12
591530.33 nmCisco 10GBASE-DWDM
SFP+ (100 GHz ITU grid)
DWDM-SFP10G-30.33
10-Gigabit Ethernet XFP and 40-Gigabit QSFP Modules
Version V01 and V02 of the XFP-10GLR-OC192SR 10-Gigabit Ethernet module listed in the following
table are not supported.
Note
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
143
Technical Specifications
10-Gigabit Ethernet XFP and 40-Gigabit QSFP Modules

Cisco ASR 9001 Specifications

General

Router Series	ASR 9000 Series
Rack Units	2 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Power Supply	AC or DC
Memory	8 GB
Forwarding Capacity	Up to 80 Gbps
Switching Capacity	160 Gbps
Operating Temperature	0 to 40°C
Weight	24 lb
Redundancy	Power supply