Cisco ASR 9001 Hardware Installation Guide

The following figure shows the side and rear chassis air flow clearance requirements for mounting the Cisco
ASR 9001 Router in a 4-post enclosed rack.
Figure 8: ASR 9001 Clearance Requirements for an Enclosed 4-Post Rack Installation
Temperature and Humidity Guidelines
The operating and nonoperating environmental site requirements are listed in Environmental Specifications,
on page 120. The router normally operates within the ranges listed in Environmental Specifications, on page
120; however, if a temperature measurement is approaching a minimum or maximum parameter, it indicates
a potential problem. Maintain normal operation by anticipating and correcting environmental anomalies before
they approach critical values, by properly planning and preparing your site before you install the router.
Power Connection Guidelines
You can configure the router with either an AC-input or DC-input power subsystem, so the site power source
requirements differ depending on the power subsystem in your router. Ensure all power connection wiring
conforms to the rules and regulations in the National Electrical Code (NEC) as well as local codes.
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
13
Preparing for Installation
Temperature and Humidity Guidelines

Cisco ASR 9001 Specifications

General

Brand	Cisco
Model	ASR 9001
Category	Network Router
Language	English