Cisco ASR 9001 Hardware Installation Guide

Installing and Removing SFP and XFP Modules
For information on installing and removing SFP and XFP modules, see the Cisco ASR 9000 Series Aggregation
Services Router Ethernet Line Card Installation Guide .
Cable Management
The Cisco ASR 9001 Router includes a cable-management system that organizes the interface cables entering
and exiting the router, keeping them out of the way, and free of sharp bends.
Excessive bending of interface cables can damage the cables.Caution
The cable-management system consists of these separate components:
•
A cable-management tray
•
A cable-management bracket
Cable Management Tray
A cable-management tray is mounted at the bottom of the Cisco ASR 9001 Router chassis for routing interface
cables to the RP. The following figure shows a typical cable routing through the cable-management tray.
Figure 50: Example Cable Routing through the Cisco ASR 9001 Router Cable Management Tray
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
73
Installing Modules and Cables in the Chassis
Installing and Removing SFP and XFP Modules

Cisco ASR 9001 Specifications

General

Brand	Cisco
Model	ASR 9001
Category	Network Router
Language	English