Step 5
The InstallShield Wizard Completed window appears. Click Finish.
Step 6
Connect the USB cable to the PC and router USB console ports. The EN LED for the USB console port turns green, and
within a few moments a pop up window stating “Installing device driver software” appears. Following the instructions
to complete the installation of the driver.
Step 7
The USB console is ready for use.
Uninstalling the Cisco Microsoft Windows USB Device Driver
• “Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver”
• “Uninstalling the Cisco Microsoft Windows Vista USB Driver”
Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver
This procedure shows you how to uninstall both the Microsoft Windows XP and 2000 USB driver. The driver
can be removed using the Windows Add Remove Programs utility or the setup.exe program.
Using the Add Remove Programs Utility
SUMMARY STEPS
1.
Click Start > Control Panel > Add or Remove Programs.
2.
Scroll to Cisco Virtual Com and click Remove.
3.
When the Program Maintenance window appears, select the Remove radio button. Click Next.
DETAILED STEPS
Step 1
Click Start > Control Panel > Add or Remove Programs.
Disconnect the router console terminal before uninstalling the driver.Note
Step 2
Scroll to Cisco Virtual Com and click Remove.
Step 3
When the Program Maintenance window appears, select the Remove radio button. Click Next.
Using the Setup.exe Program
Disconnect the router console terminal before uninstalling the driver.
Cisco ASR 9000 Series Aggregation Services Router Satellite Systems Installation Guide
59
Installing the Cisco ASR 903 Router as a Satellite Shelf
Connecting Console Cables
To Next Page
Loading...
