Cisco ATA 191 Administration Guide

DescriptionField
The number of multicast messages sent by the interface.Output Multicasts
Memory Information
Use the Status > Memory Information page to view information about memory use.
Table 85: Memory Information Interface Detail
DescriptionField
The total memory of ATA.MemTotal
The free memory of ATA.MemFree
Refresh the latest memory information.refresh
DHCP Server Information (ATA 192 Only)
Use the Status > DHCP Server Information page to view information about the DHCP server and clients.
IPv4 DHCP Pool Information
DescriptionField
The host name of the DHCP client.Client Name
The IP address leased to the client.IP Address
The MAC address of the DHCP client.MAC Address
The remaining time in the current DHCP lease, shown in HH:MM:SS
(hours:minutes:seconds) format. The page is periodically updated with
the new value as the timer counts down.
Expires Time
The interface through which the client is connected.Interface
IPv6 DHCP Pool Information
DescriptionField
The host name of the DHCP client.Client Name
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
111
Status and Statistics
Memory Information

Cisco ATA 191 Specifications

General

Fax Support	T.38 Fax Relay
Relative Humidity	10% to 90% (non-condensing)
Ports	2 FXS ports
Voice Protocol	SIP
Protocols	SIP, RTP, RTCP
Power	5V DC
Network Interfaces	10/100BASE-T Ethernet port
Operating Temperature	32°F to 104°F (0°C to 40°C)
Audio Codecs	G.711 (a-law and μ-law), G.729a, G.722, G.726
Voice Codecs	G.711 (a-law and μ-law), G.729a, G.722, G.726
Storage Temperature	14 to 140°F (-10 to 60°C)