Name: Cisco ATA 191
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

DescriptionField

Display the LAN IPv6 address information.LAN IPv6 Address

Time Settings

Use the Network Setup > Basic Setup > Time Settings page to set the system time for the ATA. By default,

the system time is set automatically by using a Network Time Protocol (NTP) server. You can configure the

system time manually. In addition, you can use this page to specify your time zone, enable Daylight Saving

adjustments, and modify related settings.

After making changes, click Submit to save your settings, or click Cancel to redisplay the page with the

saved settings.

User Manual

If you prefer to set the system manually, click User Manual and then enter the date and time.

Table 10: Time Settings

DescriptionField

Enter the date in the following order: four-digit year,

month, day.

Date

Enter the time in the following order: hour (from 1

to 24), minutes, and seconds.

Time

Time Zone

To use a time server to establish the time settings, select Time Zone. Then complete the fields in this section.

Table 11: Time Zone Settings

DescriptionField

Choose the time zone for the site where the ATA is

in operation. Default setting: (GMT-08:00) Pacific

Time (USA & Canada).

Time Zone.

Check the box if you want to automatically adjust the

time when Daylight Savings Time is in effect.

Otherwise, uncheck the box.

Adjust Clock for Daylight Saving Changes.

Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware

Network Configuration

Time Settings

Other manuals for Cisco ATA 191

Questions and Answers:

Need help?

Do you have a question about the Cisco ATA 191 and is the answer not in the manual?

General