Cisco ATA 191 Administration Guide

DescriptionField
This parameter is a firmware upgrade script with the
same syntax as Profile_Rule. Defines upgrade
conditions and associated firmware URLs.
Default setting: blank
Upgrade Rule.
Syslog message issued at the start of a firmware
upgrade attempt.
Default setting: $PN $MAC -- Requesting upgrade
$SCHEME://$SERVIP:$PORT$PATH
Log Upgrade Request Msg.
Syslog message issued after a firmware upgrade
attempt completes successfully.
Default setting: $PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR
Log Upgrade Success Msg.
Syslog message issued after a failed firmware upgrade
attempt.
Default setting: $PN $MAC -- Upgrade failed: $ERR
Log Upgrade Failure Msg.
CA Settings
Table 35: CA Settings
DescriptionField
The URL of a file location for a custom Certificate
Authority (CA) certificate. Either the IP address or
the FQDN of the server can be specified. The file
name can have macros, such as $MA, which expands
to the ATA MAC address.
Default setting: blank
Custom CA URL
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
53
Voice Settings Configuration
CA Settings

Cisco ATA 191 Specifications

General

Fax Support	T.38 Fax Relay
Relative Humidity	10% to 90% (non-condensing)
Ports	2 FXS ports
Voice Protocol	SIP
Protocols	SIP, RTP, RTCP
Power	5V DC
Network Interfaces	10/100BASE-T Ethernet port
Operating Temperature	32°F to 104°F (0°C to 40°C)
Audio Codecs	G.711 (a-law and μ-law), G.729a, G.722, G.726
Voice Codecs	G.711 (a-law and μ-law), G.729a, G.722, G.726
Storage Temperature	14 to 140°F (-10 to 60°C)