Cisco ATA 191 Administration Guide

Choices and InstructionsMenu OptionIVR Action
630Check Gateway IPv6 Address
To enter the value, press numbers on
the telephone key pad. Press the * (star)
key to enter a decimal point.
This option is available only
after you choose Static IP as
the Internet Connection Type,
through option 101.
Note
131Set Gateway IP Address
Available only in static IPv6 mode631Set Gateway IPv6 Address
140Check MAC Address
150Check Firmware Version
160Check Primary DNS Server Setting
660Check Primary IPv6 DNS Server
Setting
To enter the value, press numbers on
the telephone key pad. Press the * (star)
key to enter a decimal point.
This option is available only
after you choose Static IP as
the Internet Connection Type,
through option 101.
Note
161Set Primary DNS Server
661Set Primary IPv6 DNS Server
170Check INTRNET web server port
210ATA 192 only: Check LAN IP address
(ETHERNET port)
1910Announce Line 1 SIP Transport
0—UDP
1—TCP
2—TLS
1911Set Line 1 SIP Transport
1920Check Line 2 SIP Transport
0—UDP
1—TCP
2—TLS
1921Set Line 2 SIP Transport
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
122
IVR for Administration
IVR Actions

Cisco ATA 191 Specifications

General

Fax Support	T.38 Fax Relay
Relative Humidity	10% to 90% (non-condensing)
Ports	2 FXS ports
Voice Protocol	SIP
Protocols	SIP, RTP, RTCP
Power	5V DC
Network Interfaces	10/100BASE-T Ethernet port
Operating Temperature	32°F to 104°F (0°C to 40°C)
Audio Codecs	G.711 (a-law and μ-law), G.729a, G.722, G.726
Voice Codecs	G.711 (a-law and μ-law), G.729a, G.722, G.726
Storage Temperature	14 to 140°F (-10 to 60°C)