Cisco ATA 191 Administration Guide

FreqScript 55
ToneScript 55
Call Progress Tones 56
Distinctive Ring Patterns 58
Distinctive Call Waiting Tone Patterns 59
Distinctive Ring/CWT Pattern Names 60
Ring and Call Waiting Tone Spec 61
Control Timer Values (Sec) 62
Vertical Service Activation Codes 63
Vertical Service Announcement Codes 69
Outbound Call Codec Selection Codes 69
Miscellaneous 70
Line 1 and Line 2 Settings (PHONE 1 and PHONE 2) 72
General 72
Streaming Audio Server (SAS) 72
NAT Settings 73
Network Settings 74
SIP Settings 75
Call Feature Settings 77
Proxy and Registration 78
Subscriber Information 80
Supplementary Service Subscription 81
Audio Configuration 84
Dial Plan 87
FXS Port Polarity Configuration 88
User 1 and User 2 88
Call Forward Settings 89
Selective Call Forward Settings 89
Speed Dial Settings 90
Supplementary Service Settings 90
Distinctive Ring Settings 92
Ring Settings 92
CHAPTER 5 Administration Settings 95
Management 95
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
v
Contents

Cisco ATA 191 Specifications

General

Fax Support	T.38 Fax Relay
Relative Humidity	10% to 90% (non-condensing)
Ports	2 FXS ports
Voice Protocol	SIP
Protocols	SIP, RTP, RTCP
Power	5V DC
Network Interfaces	10/100BASE-T Ethernet port
Operating Temperature	32°F to 104°F (0°C to 40°C)
Audio Codecs	G.711 (a-law and μ-law), G.729a, G.722, G.726
Voice Codecs	G.711 (a-law and μ-law), G.729a, G.722, G.726
Storage Temperature	14 to 140°F (-10 to 60°C)