Cisco C20 - Sound Volume & Ring Tones

10
D14582.15R1 (Rev.1 Nov 2013) User guide Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set,
MX200, MX300. All contents are copyright © 2010–2013 Cisco Systems, Inc. Version TC6.2, 06.2013. English
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300 User guide
www.cisco.com
Sound volume & ring tones
You may personalize the ring tone and its volume, if
you wish. You may also set keytones to On (a sound
will appear when tapping a “button”) or to O.
Tap Settings to invoke
the Settings menu.
Navigate to Ringtone and Sound
Settings, if needed.
Exit the menu by
tapping here.
Set the Ringtone
volume here.
Activate (On) or deactivate (O) the keytones
here. In this example Keytones are set to On.
Select a ring tone. You will hear the
ring tones as you tap on them.