40
D14582.15R1 (Rev.1 Nov 2013) User guide Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set,
MX200, MX300. All contents are copyright © 2010–2013 Cisco Systems, Inc. Version TC6.2, 06.2013. English
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300 User guide
www.cisco.com
Settings > Date, Time & Location
Date, Time & Location
This window lets you specify your preferred date and
time formats, as well as the time zone.
If you set the Date and Time Mode to Auto (as has
been done in this example), the system will look for an
NTP server and get date and time from there.
If you choose to set NTP mode to Manual (as has
been done in this example), you must specify the NTP
server address to make things work.
To Next Page
Loading...
