9
D14582.15R1 (Rev.1 Nov 2013) User guide Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set,
MX200, MX300. All contents are copyright © 2010–2013 Cisco Systems, Inc. Version TC6.2, 06.2013. English
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300 User guide
www.cisco.com
Editing a camera preset
Most Cisco TelePresence systems let you create
predened zoom and camera pointing directions—see
the previous page for details on how to dene new
camera presets.
An existing preset may have its pan and zoom altered
or the entire preset may be removed.
If you want to change the name of the preset, you
should delete it and create a new preset.
Tap Camera to invoke
the Camera menu.
Adjust Pan and Zoom as required.
Then tap
next to preset to be
edited, as outlined.
In the submenu tap Update to new
position to put your changes into
eect, or tap Remove to delete the
selected preset.
Tap anywhere outside the menus to exit the menu.
To Next Page
Loading...
